if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Wireless 2H/1C Non-Programmable PTAC Thermostat, Includes Receiver
BREEZE33 BZ33-201NW PTAC WIRELESS THERMOSTAT NON PROGRAMMABLE FOR USE WITH PTAC 2H/1C HEAT PUMP OR 1H/1C CONVENTIONAL HVAC ***while supplies last****
Thermostats
}
Brand: 
Wireless 2H/1C Non-Programmable PTAC Thermostat, Includes Receiver
3525088
MFG #: BZ33-201NW
Product ID:3525088
Famous Supply
- Color: White
- Dimensions: 4.71 x 3.84 x 0.98 in
- Display Type: LCD Screen
- Fan Switching: Low/Auto/High
- Full Load Current: 0.02–1.0 A a
- Humidity Range: 90% non-condensing maximum
- Mounting Type: Mounts on wall or junction box
- Power Source: 2 AAA alkaline batteries (included) or 18–30 VAC hardwired, 50/60 Hz, NEC Class II
- Stages Cool: 1
- Stages Heat: 2
- Type: Wireless
- Voltage Rating: 18–30 VAC, 50/60 Hz
- Thermostat Type: Non-Programmable
- Control Range: 44°–90°F (7°–32°C)
- Switch Type: Manual
- Temperature Settings per Day: N/A (non-programmable)
- Programs per Week: N/A (non-programmable)
- Terminal Designations: TX: RH,C RX: C, GL, W, Y, B, GH, R
The Breeze33® BZ33-201NW is a non-programmable wireless PTAC thermostat designed to control heating and cooling in compatible packaged terminal air conditioner (PTAC) systems without running thermostat wire between the wall control and the unit. The kit includes a battery-powered wall control and a receiver that mounts in the PTAC, letting installers place the control wherever it best senses room temperature. It supports 1H/1C conventional or 2H/1C heat pump configurations, holds setpoints between 44°F and 90°F, and offers manual heat/cool changeover with low/auto/high fan speeds. HVAC technicians and installers use it to retrofit PTAC-equipped hotel, multifamily, and assisted-living units without pulling new thermostat wire through the wall.
- Features
- Warranty
- Application
| Displays temperature settings on an LCD screen at the wall-mounted control. |
| Wireless design sends signals from the wall control to a receiver that mounts in the PTAC, eliminating the need to run thermostat wire through the wall. |
| Built for use with PTAC systems only. |
| Supports 2 heat/1 cool PTAC heat pump systems or 1 heat/1 cool conventional PTAC systems. |
| Fan runs at low, auto, or high speed. |
| Powered by two included AAA batteries or an 18–30 VAC hardwired connection. |
| Holds temperature settings between 44°F and 90°F. |
| Includes a 5-year manufacturer warranty. |
| Includes a receiver that mounts inside the PTAC unit to receive the wall control's signal. |
| Uses a manual heat/cool changeover switch. |
| 5 Year Warranty |
| 1H/1C conventional or 2H/1C heat pump |