Duro Dyne Rapit 8085 Regulator Set, Steel, Galvanized, Domestic

DURODYNE 8085 RS256 RAPIT REGULATOR 2 SPRING BEARINGS 1 WASHER HANDLE AND WING NUT (10/bx 10bx/ct)

Duct Damper Regulators
}

Duro Dyne Rapit 8085 Regulator Set, Steel, Galvanized, Domestic

146086 MFG #: 8085 Product ID:146086
Famous Supply
Duro_Dyne_8085_HR.png
  • Material: Steel
  • Finish: Galvanized
  • Domestic/Import: Domestic
The Rapit® is an inexpensive, rattle-free regulator for quick installation on balance or splitter dampers. It is formed from rust-resistant, heavy gauge, galvanized steel and installs in seconds. The Rapit will penetrate and secure to round or rectangular damper blades up to 24 gauge steel. It has a fully retractable bearing of zinc alloy, threaded to accept a 5/16-18 wing nut and a handle that indicates the damper position.
  • Features
  • Includes
Slip the bearing over the edge of the damper at the bearing line
Lay the assembly on any firm surface and rap the prong with a hammer
One blow drives the prong through the damper blade, holding it securely to the damper
When hit with a hammer, the prong will automatically form up tight by the anvil, which is built into the bottom of the rapit bearing
(2) RB-50 Rapit® Spring Bearings, (1) RP-3 Washer, (1) RP-1 Handle, (1) RP-2 Wing Nut