Field Controls 10"M+MG2 Triple Acting Draft Control, 10 in L x 11 in W

FIELD 01950201 10" M+MG2 (10M-MG2-STD) BAROMETRIC DRAFT CONTROL W/COLLAR

Barometric Dampers
}

Field Controls 10"M+MG2 Triple Acting Draft Control, 10 in L x 11 in W

625702 MFG #: 01950201 Product ID:625702
Famous Supply
Field_Controls_10_M_MG2_HR.png
  • Series: M+MG2
  • Type: Triple Acting
  • Length: 10 in
  • Width: 11 in
For proper operation and efficient fuel consumption in oil, gas, and/or coal-fired heating appliances, draft must remain constant. When it is, combustion is more complete, fuels are utilized efficiently, and money is saved. Field Draft Controls maintain consistent draft by counteracting the negative forces caused by changes in temperature and barometric pressure, as well as the effects of wind.
  • Features
  • Standards & Approvals
  • Application
This is a series of compact, rugged, heavy-duty controls for use on large residential, commercial and industrial applications
The field type M+MG2 draft control provides precise draft regulators for solid fuels, oil, gas, or oil/gas appliances requiring only the simplest, on-the-job adjustments depending on which fuel is to be utilized
In a gas installation, the double-acting Type M+MG2 is specified instead of a draft hood to give the appliance the assistance of the chimney
In a duel fuel oil/gas or a gas-fired only application, use the M+MG2 as a double-acting draft control with the optional field thermal switch accessory
Use the M+MG2 as a single-acting draft control for oil or solid fuel applications
For any installation with 10 in or larger diameter vent pipe, specify our standard M+MG2 draft control, the unit that can be adapted to any fuel
The moving part (gate) rests on a long, thin, stainless steel knife edge which, in turn, is supported by self-aligning and self-cleaning bearings
When the heavy gauge gate moves, only the knife edge rests on the bearing for minimum friction and maximum sensitivity to draft changes
Control size 10
78.5 sq-in nominal capacity
9 to 10 in recommended pipe diameter
28-1/4 to 31-1/2 in recommended pipe circumference
CSA Certified
cULus Listed
Commercial/Industrial Solid and Oil or Gas