if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
1/2 in PowerPEX V-Sleeve 649TX2 V-Sleeve
SIOUX 649TX2 1/2" V-SLEEVE
PEX Sleeves
}
1/2 in PowerPEX V-Sleeve 649TX2 V-Sleeve
3287994
MFG #: 649TX2
Product ID:3287994
Famous Supply
- Length: 0
- Series: 649
- Nominal Size: 1/2 in
- Material: Stainless Steel
- Domestic/Import: Domestic
Sioux Chief's V-Sleeve stainless steel compression system is to be used to plumb any hot and cold potable plumbing application or radiant heat application. V-Sleeve is to be used with any SDR-9 PEX tubing and size specific ASTM F2159 or ASTM F1807 fitting. V-Sleeve's design shall allow for 360-degree compression over sealing barbs and 360-degree visual inspection of a properly inserted pipe. V-Sleeve's length and seal shall position sleeve compression directly over sealing barbs including the lead-in barb. V-Sleeve shall be F-877 certified.
- Features
- Standards & Approvals
| Visibility of tube fully inserted in sleeve and to tube stop on fitting |
| V-Sleeves™ are to be used with ASTM F1807 and F2159 PEX fittings in conjunction with any SDR9 PEX tubing manufactured to the ASTM F876 or ASTM F877 |
| 360 deg visibility of crimped sleeve |
| 360 deg compression on all sealing surface areas |
| Sleeve can be pre-loaded onto fitting or tube |
| "V" sleeve must be installed using a Sioux chief 305-8_TX compression tool |
| Third party tested to ASTM F877, UPC listed |
| Stainless steel PEX sleeve |
| 0.595 in H |
| 0.718 in width |
| 0.64 in ID |
| Proudly made in america |
| ASTM F1807 |