PHD 1410050EG NFPA Swivel Ring Hanger, 1/2 in Pipe, 300 lb, 3/8 in Rod, Carbon Steel, Electro-Galvanized, Domestic

PHD 1410050EG 1/2" GALV RING HANGER 3/8" ROD SIZE

Swivel Ring Hangers
}

PHD 1410050EG NFPA Swivel Ring Hanger, 1/2 in Pipe, 300 lb, 3/8 in Rod, Carbon Steel, Electro-Galvanized, Domestic

892929 MFG #: 141-1/2 Product ID:892929
Famous Supply
Phd_141_0075EG_HR.png
  • Length: 3-1/16 in
  • Series: FIG 141
  • Pipe Size: 1/2 in
  • Load Capacity: 300 lb
  • Rod Size: 3/8 in
  • Material: Carbon Steel
  • Finish: Electro-Galvanized
  • Domestic/Import: Domestic
Designed for the suspension of non-insulated stationary pipe lines. The knurled insert nut that allows a vertical adjustment after installation, is tapped to NFPA reduced rod size standards. Captured knurled insert nut present on pipe sizes 1/2 in (15 mm) to 2 in(50 mm). The capture is permanent in the bottom portion of the band, allowing the hanger to be opened during installation if desired, but preventing the knurled insert nut from falling completely out.
  • Features
  • Standards & Approvals
Underwriters' laboratories listed in the US (UL), Canada (CUL), for use with standard steel pipe sizes 3/4 in (20 mm) to 8 in (200 mm) and CPVC pipe sizes 3/4 in (20 mm) to 4 in (100 mm)
Low carbon steel
ANSI/SP 69/58 (Type 10)
cULus Listed
Federal A-A-1192A (Type 10)
FM Approved