Zoeller 267-0001 Waste-Mate 260 Submersible Pump, 1/2 hp, 115 VAC, 2 or 3 in NPT Outlet, Cast Iron, 10.4 A, 1 ph
ZOELLER 267-0001 M-267 WASTE MATE 115 VOLT SEWAGE EJECTOR
Sewage Pumps
}
Brand: 
Zoeller 267-0001 Waste-Mate 260 Submersible Pump, 1/2 hp, 115 VAC, 2 or 3 in NPT Outlet, Cast Iron, 10.4 A, 1 ph
1869297
MFG #: 267-0001
Product ID:1869297
Famous Supply
- Bearing Type: Sleeve
- Cord Type: 3-Wire Neoprene
- Dimensions: 14-5/16 in H
- Flow Rate: 128 gpm
- Frequency Rating: 60
- Impeller Type: Non-Clogging Vortex
- Maximum Head: 21-1/2 ft
- Motor Speed: 1750 rpm
- Temperature Rating: 130 deg f
- Series: Waste-Mate 260
- Horsepower: 1/2
- Voltage Rating: 115
- Outlet Size: 2 or 3 in NPT
- Material: Cast Iron
- Amperage Rating: 10.4
- Phase: 1
Considered one of America's most popular sump pumps. This robust family of sump pumps is known for reliability, durability and performance. The preset, integral snap-action float switch is engineered for one million mechanical starts. The heat-dissipating cast iron body with epoxy powder coated finish provides maximum pumping performance under the most extreme conditions. With Zoeller® cool run design, the hermetically sealed, oil-filled motor and non-clogging vortex impeller add up to a long-lasting, trouble-free product.
- Features
- Standards & Approvals
- Application
| Float operated 2-pole mechanical switch |
| Durable cast construction, ASTM Class 25 cast iron switch case and pump housing |
| Non-clogging vortex impeller design, engineered plastic impeller with metal inserts (1 ph) |
| Not affected by materials normally found in drainage and sewage pumps |
| Stainless steel screws, bolts, handle, guard, arm and seal assembly |
| Neoprene square ring and gasket |
| Oil filled, hermetically sealed motors |
| Oil-lubricated bearings |
| Carbon and ceramic shaft seal |
| Corrosion-resistant, powder coated epoxy finish |
| Completely submersible |
| Watertight and dust-tight |
| Automatic reset thermal overload protection (1 ph only) |
| 12 in on point, 4 in off point |
| High water alarms available |
| 10 in auto/15 in non auto, 3-wire neoprene cord and plug |
| Cap/motor housing/pump housing cast iron, base cast iron or engineered plastic |
| Upper and lower sleeve bearing |
| Engineered plastic with metal insert impeller, Stainless steel hardware, AISI 1215 cold rolled steel motor shaft, Neoprene gasket |
| Submersible sewage/effluent or dewatering pump |
| cSAUS Certified |
| UL Listed |
| Residential, Light Commercial, New Construction and Wastewater/Lift Stations |