Simpson Strong-Tie DIA50 Threaded Drop-In Anchor, 1/2 in, 5/8 in Drill, Carbon Steel, 2 in D Min Embedment

SIMPSON STRONG TIE DIAB50 DROP-IN ANCHOR 1/2" ROD SIZE CARBON STEEL

Drop-In Anchors
}

Simpson Strong-Tie DIA50 Threaded Drop-In Anchor, 1/2 in, 5/8 in Drill, Carbon Steel, 2 in D Min Embedment

3332218 MFG #: RPS18 Product ID:3332218
Famous Supply
Simpson_Strong_Tie_DIA25_HR.png
  • Finish: Zinc Plated
  • Overall Length: 2 in
  • Shear Strength: 1750 lb at 2000 psi/3000/4000 psi for Concrete
  • Tensile Strength: 830 lb at 2000 psi, 1178 lb at 3000 psi, 1525 lb at 4000 psi for Concrete
  • Thread Length: 3/4 in
  • Thread Size: 1/2-13
  • Thread Type: UNC
  • Bolt/Rod Size: 1/2 in
  • Material: Carbon Steel
  • Drill Size: 5/8 in
  • Minimum Embedment Depth: 2 in
  • Type: Threaded
Drop-In anchors are internally threaded drop-in expansion anchors for use in flush-mount applications in solid base materials. Available in stainless steel (DIA), short (DIAS) or coil-thread (DIAC) versions. Minimum thread engagement should be equal to the nominal diameter of the threaded insert.
  • Features
  • Standards & Approvals
  • Application
Lipped edge (DIAS) eliminates need for precisely drilled hole depth
Available in coil-thread version for 1/2 in and 3/4 in coil-threaded rod
2600 to 2700 deg F freezing/melting point
Expander plug meets minimum 50000 psi tensile strength
Anchor body meets minimum 70000 psi tensile
The allowable loads are based on a safety factor of 4
The minimum concrete thickness is 1-1/2 times the embedment depth
OSHA 29 CFR 1910.1000
Federal Specification A-A-55614
Type I
FM 3017082
UL File Ex3605
For flush mount applications in solid base materials