All pre-wired switche are housed in a steel NEMA 1 enclosure, with electrostatically applied and baked powder paint |
The heavy-duty generac contactor is a UL recognized device, designed for year of service |
The controller at the generator handle all the timing, sensing and exercising function |
Electrically operated, mechanically-held contact for fast, positive connections |
Rated for all classes of load, 100 percent equipment rated, both inductive and resistive |
2 pole, 240 VAC contactor |
30 millisecond transfer time |
Dual coil (100A) and single coil (50A) design |
Main contact are silver plated or silver alloy to resist welding and sticking |
NEMA 1 (indoor rated) enclosure is standard |
The transfer switch contactor is rated at 240 VAC and is available in a single phase configuration only |
16 circuit switch |
60 Hz rated AC frequency |
10000 A Withstand |
1/0 - #14 lug range |
Open transition load transition type |
Less than 60 percent utility voltage drop-out |
5 second engine warm-up delay |
60 percent for 5 second standby voltage sensor |
Greater than 80 percent utility voltage pickup |