270 deg rotating swivel barrel |
7200 lb hydraulic ram output |
15 to 112 deg F operating temperature range |
4 sec approximate cycle time |
Led light for continued operations in no or low light environments |
42000 cycles longest service interval in the industry |
Compatible with all standard series pressing jaws and attachments from RIDGID® |
For use with copper and stainless steel tubing, steel pipe, PEX and cutting soil pipe |
Smaller tool increases maneuverability, reduces operator fatigue |
Ultimate flexibility with the ability to switch between battery and AC power on the same tool |
Perfect for getting at hard to reach connections |
18 v advanced Lithium 4 battery helps the RP 340 achieve more than 400 presses per charge, and it has an industry-leading service interval of 42000 cycles |
Designed to mechanically press fittings onto tubing to create a water tight and permanent seal |
Switch on the RP 340 is depressed, an internal electric motor powers a hydraulic pump which forces fluid into the cylinder of the tool, forcing the ram forward and applying thousands of pounds of pressing force onto specially designed fittings |
1/2 to 4 in copper and stainless steel and 1/2 to 2 in PFX capacity |