Bradford White D80T2503NA Flue Damper Gas Water Heater, 80 gal Tank, 250000 Btu/hr Heating, Natural Gas Fuel, Atmospheric Vent, 80 %, Domestic
BRADFORD-WHITE D-80T-250-3NA . ASME 80 GALLON 250,000 BTU
Bradford White D80T2503NA Flue Damper Gas Water Heater, 80 gal Tank, 250000 Btu/hr Heating, Natural Gas Fuel, Atmospheric Vent, 80 %, Domestic
- Dimensions: 28-1/4 in Dia x 32-1/2 in D x 71-7/8 in H
- Finish: Vitraglas®
- Gas Connection: 3/4 in
- Ignition Type: Electronic
- Material: Steel
- Pressure Rating: 150 psi
- Recovery Rate: 606 gph at 40 deg F Rise
- Series: D Series
- Temperature Rating: 180 deg f
- Type: Flue Damper
- Vent Size: 6 in
- Water Connection: 1-1/2 in
- Tank Capacity: 80 gal
- Heating Capacity: 250000 btu/hr
- Fuel Type: Natural Gas
- Vent Type: Atmospheric
- Energy Efficiency: 80
- Ultra Low NOx: No
- ASME(Yes/No): Yes
- Domestic/Import: Domestic
- Bradford_D-100L-199-3X_Warranty.pdf(Warranty Information)
- Bradford_White_CEHD1201833CCF_Warranty.pdf(Warranty Information)
- Bradford_White_D100L1993N_Line_Drawing.pdf(Line Drawing)
- Bradford_White_D100L1993N_Manual.pdf(Instruction Installation Manual)
- Bradford_White_D100L1993N_Service_Manual.pdf(Service Manual)
- Bradford_White_D100L1993N_Specification_Sheet.pdf(Specification Sheet)
- Bradford_White_D-100L-199-3X_Line_Drawing.pdf(Line Drawing)
- Features
- Warranty
- Standards & Approvals
- Includes
- Application
ICON HD™ - Intelligent proven design combines temperature control, diagnostic codes and system ignition functions into a single control board with a digital LCD display |
Operation mode - Two different digitally displayed operation modes have the capability of adjusting the temperature setting up to 180 deg F, and adjusting the degree setting |
Service mode - Eight different digitally displayed service modes can be easily cycled through by pressing the select button |
Electronic ignition - High voltage, low current electricity is sent to the pilot electrode initiating a spark to ignite the pilot gas |
Automatic flue damper |
Factory installed Hydrojet® sediment reduction system - Cold water inlet sediment reducing device helps prevent sediment build up in the tank |
Vitraglas® lining |
Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss |
Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections |
Hand hole cleanout |
E.C.O - An automatic re-set energy cut off (E.C.O.) shuts off all gas in event of an overheat condition |
Protective magnesium anode rod |
Sanitizing capability |
3 Years Limited on Tank/1 Year Limited on Component Parts |
AHRI Certified |
ANSI Z-21.10.3 |
ASME HLW Standard |
ASHRAE 90.1b |
ASME Standard |
CSA LLC-Low Lead Content |
CSA International (Formerly AGA/CGA) |
CEC Listed |
NSF Approved |
North Carolina Code Compliant |
Temperature and Pressure Relief Valve |
Commercial Applications |