if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1)) { this.Model.StructuredPageData = string.Empty; //} }

80 Gallon Tall Natural Gas Atmospheric Vent Water Heater, 725,000 BTU, T&P Installed, 4.5 in WC

BRADFORD-WHITE D-80T-725-3NA 75 GAL 725,000 BTU ASME INDUCED DRAFT

Commercial Gas Tank Water Heaters }

80 Gallon Tall Natural Gas Atmospheric Vent Water Heater, 725,000 BTU, T&P Installed, 4.5 in WC

887803 MFG #: D-80T-725-3NA Product ID:887803
Famous Supply
  • Dimensions: 28-1/4 Dia x 39-7/8 D x 83-15/16 H in
  • Gas Connection: 1 in
  • Ignition Type: Electronic
  • Pressure Rating: 150 psi
  • Recovery Rate: 1757 gph
  • Series: D-T-725-3NA
  • Temperature Rating: 180 deg f
  • Type: Standard
  • Vent Size: 8 in
  • Water Connection: 1-1/2 in
  • Tank Capacity: 80 gal
  • Heating Capacity: 725000 btu/hr
  • Fuel Type: Natural Gas
  • Vent Type: Atmospheric
  • Energy Efficiency: 80
  • Tall or Short: Tall
  • Ultra Low NOx: No
  • ASME(Yes/No): Yes
Bradford White's commercial Electronic Ignition Induced Draft models were developed in order to provide incredible output and a great volume of hot water from a relatively small commercial water heater. They feature a smaller vent diameter for ease of installation and an automatic flue damper to reduce stand-by loss and improve overall efficiency.
  • Features
  • Warranty
  • Standards & Approvals
  • Includes
  • Application
ICON HD™ - Intelligent proven design combines temperature control, diagnostic codes and system ignition functions into a single control board with a digital LCD display
Operation mode - Two different digitally displayed operation modes have the capability of adjusting the temperature setting up to 180 deg F, and adjusting the degree setting
Service mode - Eight different digitally displayed service modes can be easily cycled through by pressing the select button
Factory installed Hydrojet® sediment reduction system
Vitraglas® lining
Insulation system - 2 in Non-CFC foam insulation covers the sides and top of the tank, reducing heat loss
Potable water connections
Protective magnesium anode rod
Hand hole cleanout
An automatic re-set energy cut off (E.C.O) shuts off all gas in event of an overheat condition
Sanitizing capability
Brass drain valve
3 Years Limited on Tank/1 Year Limited on Component Parts
AHRI Certified
ANSI Z-21.10.3
ASHRAE 90.1b
ASME HLW
CEC Listed
CSA LLC-Low Lead Content
CSA International (Formerly AGA/CGA)
NSF 372
Temperature and Pressure Relief Valve
Commercial Applications