if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1)) { this.Model.StructuredPageData = string.Empty; //} }

Bradford White RG2DV50H6N-OLY Natural Gas Water Heater, 50000 Btu/hr Heating, 48 gal Tank, Direct Vent, 54 gph Recovery

BRADFORD-WHITE RG2DV50H6N-OLY . 48 GAL 50 BTU 4.0 WC NO VENT KIT WITH INSTALLED T&P VALVE

Residential Gas Tank Water Heaters
}

Bradford White RG2DV50H6N-OLY Natural Gas Water Heater, 50000 Btu/hr Heating, 48 gal Tank, Direct Vent, 54 gph Recovery

3329234 MFG #: RG2DV50H6N-OLY Product ID:3329234
Famous Supply
Bradford_WhiteRG2DV50H6NFLX_N_HR.png
Direct Vent water heaters utilize a co-axial (pipe inside a pipe) vent pipe that takes air in from the outside (outer vent) and vents combustion gases directly back to the outside (outer vent). It is the perfect choice for situations with insufficient combustion air. No electricity required.
  • Features
  • Warranty
  • Standards & Approvals
  • Includes
  • Application
Bradford White® ICON System™: Intelligent gas control with proven millivolt powered technology and built-in piezo igniter off the shelf thermopile converts heat energy from the pilot flame into electrical energy to operate the gas valve and microprocessor, no need for external electricity
Enhanced performance: Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
Advanced temperature control system: Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
Intelligent diagnostics: An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting
Pilot on indication: Flashing green led provides positive indication that pilot is on
Separate immersed thermowell: High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
Closed combustion: All air for combustion is taken directly from the outside, the co-axial vent pipe (pipe inside a pipe) draws combustion air in through the outer pipe, and exhausts the products of combustion through the inner pipe, the co-axial vent pipe at the top of the unit can be rotated for venting flexibility
Reinforced seals: Seals surround the closed combustion chamber and the FVIR inner door, preventing the ignition of flammable vapors outside of the water heater
Maintenance free: The vent piping and the closed combustion chamber with reinforced seals does not require regular cleaning under normal operating conditions
Sight window: Offers a view into the combustion chamber to observe the operation of the pilot and burner
Factory installed Hydrojet® total performance system: Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank
Vitraglas® lining
Cast aluminum air intake boot: A cast molded air intake boot design provides exceptional durability during installation and operation
Telescoping solid vent kits: Multiple kits allow up to 8 ft vertical and 8 ft horizontal vent lengths: Multiple kits allow up to 8 ft vertical and 8 ft horizontal vent lengths
Flexible vent kit: The maximum vent length (horizontal and vertical) can be flexed to 100 in (horizontal termination only)
Insulation system: 2 in Non-CFC foam insulation covers surrounds the tank surface, saving energy by reducing the amount of heat loss
Pedestal base
Water connections: 3/4 in NPT factory installed true dielectric fittings
Factory installed heat traps
Protective magnesium anode rod
6 Years Limited on Tank/6 Years Limited on Component Parts
AHRI Certified
ANSI Z21.10.1-2014
ASHRAE 90.1b
CEC Listed
CSA 4.1-2014
CSA International (Formerly AGA/CGA)
CSA LLC - Low Lead Compliant
Massachusetts Approved
NAECA Compliant
NSF 372
Temperature and Pressure Relief Valve
Residential Application