if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
48 Gallon Natural Gas Power Direct Vent Water Heater, 60,000 BTU, T&P Installed, 4.0 in WC
BRADFORD-WHITE RG2PDV50H6N 48 GAL 60 BTU 4.0 WC WITH INSTALLED T&P VALVE
Residential Gas Tank Water Heaters
}
48 Gallon Natural Gas Power Direct Vent Water Heater, 60,000 BTU, T&P Installed, 4.0 in WC
3329244
MFG #: RG2PDV50H6N
Product ID:3329244
Famous Supply
-
Dimensions:
22 x 59-5/16 in
-
Energy Factor:
0.68
-
Gas Connection:
1/2 in
-
Ignition Type:
Pilot
-
Pressure Rating:
150 psi
-
Series:
RG2PDV50H6N
-
Type:
Standard
-
Vent Size:
3 in
-
Water Connection:
3/4 in
-
Heating Capacity:
60000 btu
-
Tank Capacity:
48 gal
-
Fuel Type:
Natural
-
Vent Type:
Power Direct Vent
-
Condensing/Non Condensing:
Non-Condensing
-
Recovery Rate:
65 gph
-
Tall or Short:
Tall
-
Ultra Low NOx:
No
A 48-gallon natural gas power direct vent water heater with sealed two-pipe combustion that draws all air from outdoors, ideal for tightly sealed homes or spaces with limited combustion air. Flexible PVC venting and a glass-lined tank deliver dependable, efficient hot water.
-
Features
-
Warranty
-
Standards & Approvals
-
Includes
-
Application
| Sealed two-pipe combustion draws all air from outdoors |
| Suited to tightly sealed homes or rooms with limited combustion air |
| Flexible horizontal or vertical venting through PVC |
| Defender Safety System® flammable vapor ignition resistant design |
| ICON System® intelligent gas control |
| Vitraglas® enamel tank lining with Microban® antimicrobial protection |
| Hydrojet® sediment reduction system for improved hot water delivery |
| Factory-installed dielectric water connections with heat traps |
| Factory-installed T&P relief valve and brass drain valve |
| 6-year limited tank warranty |
| Side connections: 3/4 in NPT tapping's allow easy connections for space heating applications |
| Factory installed heat traps: Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation |
| Protective magnesium anode rod: Provide added protection against corrosion for long-term, trouble free service |
| Low restriction brass drain valve: Durable tamper proof design |
| NOx emission: less than 40 ng/J |
| 6 Years Limited on Tank/6 Years Limited on Component Parts |
| AHRI Certified |
| ANSI Z21.10.1-2014 |
| ASHRAE 90.1b |
| CEC Listed |
| CSA 4.1-2014 |
| CSA International (Formerly AGA/CGA) |
| CSA LLC - Low Lead Compliant |
| Massachusetts Approved |
| NAECA Compliant |
| NSF 372 |
| Temperature and Pressure Relief Valve |