Air separators are used to continuously remove the air contained in the hydronic circuits of heating and cooling systems |
The air discharge capacity of these devices is very high |
They are capable of removing automatically all the air present in the system down to the micro-bubble level |
The circulation of fully de-aerated water enables the equipment to operate under optimum conditions, free from noise, corrosion, localized or mechanical damage |
Micro-bubbles, fusing with each other, increase in volume (get larger) until they become large enough to rise to the top where they are automatically released |
Stainless steel float guide pin and linkage |
1/2 in FNPT bottom thread |
Glass reinforced nylon internal element |
Up to 100% removal air separation efficiency |