Bradford White D75T1253N Flue Damper Gas Water Heater, 75 gal Tank, 125000 Btu/hr Heating, Natural Gas Fuel, Atmospheric Vent, 80 %, Domestic

BRADFORD-WHITE D-75T-125-3N 75 GALLON 125,000 BTU COMMERCIAL NATURAL GAS WATER HEATER

Commercial Gas Tank Water Heaters
}

Bradford White D75T1253N Flue Damper Gas Water Heater, 75 gal Tank, 125000 Btu/hr Heating, Natural Gas Fuel, Atmospheric Vent, 80 %, Domestic

113399 MFG #: D-75T-125-3N Product ID:113399
Famous Supply
Bradford_White_D100L1993N_N_HR.png
  • Dimensions: 28-1/4 in Dia x 32-1/2 in D x 72-1/4 in H
  • Finish: Vitraglas®
  • Gas Connection: 3/4 in
  • Ignition Type: Electronic
  • Material: Steel
  • Pressure Rating: 150 psi
  • Recovery Rate: 303 gph at 40 deg F Rise
  • Series: D Series
  • Temperature Rating: 180 deg f
  • Type: Flue Damper
  • Vent Size: 5 in
  • Water Connection: 1-1/2 in
  • Tank Capacity: 75 gal
  • Heating Capacity: 125000 btu/hr
  • Fuel Type: Natural Gas
  • Vent Type: Atmospheric
  • Energy Efficiency: 80
  • Ultra Low NOx: No
  • ASME(Yes/No): No
  • Domestic/Import: Domestic
ASME and Non-ASME Electronic Ignition models, featuring the ICON HD™ Commercial Control System, provide solutions to applications with various demands for hot water. With capacities ranging from 38 to 100 gal and with inputs from 125000 to 505000 Btu/hr. There's a model that will meet various requirements. Power Vent kits are available for all models.
  • Features
  • Warranty
  • Standards & Approvals
  • Includes
  • Application
ICON HD™ - Intelligent proven design combines temperature control, diagnostic codes and system ignition functions into a single control board with a digital LCD display
Operation mode - Two different digitally displayed operation modes have the capability of adjusting the temperature setting up to 180 deg F, and adjusting the degree setting
Service mode - Eight different digitally displayed service modes can be easily cycled through by pressing the select button
Electronic ignition - High voltage, low current electricity is sent to the pilot electrode initiating a spark to ignite the pilot gas
Automatic flue damper
Factory installed Hydrojet® sediment reduction system - Cold water inlet sediment reducing device helps prevent sediment build up in the tank
Vitraglas® lining
Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss
Water connections - 1-1/2 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections
Hand hole cleanout
E.C.O - An automatic re-set energy cut off (E.C.O.) shuts off all gas in event of an overheat condition
Protective magnesium anode rod
Sanitizing capability
3 Years Limited on Tank/1 Year Limited on Component Parts
AHRI Certified
ANSI Z-21.10.3
ASME HLW Standard
ASHRAE 90.1b
CSA LLC-Low Lead Content
CSA International (Formerly AGA/CGA)
CEC Listed
NSF Approved
North Carolina Code Compliant
Temperature and Pressure Relief Valve
Commercial Applications