Sealed-in lithium battery power supply |
No battery replacement required over the 10 year life of the alarm |
Eliminates worry about battery removal or unauthorized deactivation of alarm |
Self activation alarm automatically activates when attached to the mounting bracket |
Test reset button tests the unit for proper operation |
Resets the carbon monoxide alarm |
Green LED flashes every 30 s to indicate the unit is operating properly |
Red LED when a dangerous level of carbon monoxide is detected the red led will pulse and a loud alarm pattern will sound |
The carbon monoxide alarm pattern is 4 short beeps, followed by 5 s of silence, followed by 4 short beeps with a corresponding red LED flash |
This cycle will continue for 4 min and then change to 2 patterns once a minute there after |
Amber LED, flashes every second to indicate the unit is in fault mode |
One quick beep every 30 s alerts the unit is in error condition |
One quick beep every 60 s is an indication of low battery power |
Event memory red led flashes every 60 sec to alert that a high level of carbon monoxide has been detected within the last 14 days |