BONNEY FORGE HL-41-SW SL 1-1/2" 800# FORGED STEEL, SOCKET WELD, PISTON CHECK VALVE
-
Inlet to Outlet Length:
5.91 in
-
Port Type:
Standard
-
Pressure Rating:
1975 psi
-
Temperature Rating:
100 deg f
-
Top to Inlet Center:
3.62 in
-
Trim Material:
F6/HF
-
Nominal Size:
1-1/2 in
-
End Style:
Socket Weld
-
Pressure Class:
800 lb
-
Body Material:
Steel
-
Softgoods Material:
F316L/Graphite
Bonney Forge valves are available in two bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F316L/graphite. Ring joint gasket are also available on request. The second design is the welded bonnet, with a threaded and seal welded joint. On request a full penetration strength welded joint is available. The check valves are also available in three different design configurations. These are piston check, ball check, or swing check designs.