Mill-Rose Cleanfit 70820 3-Wrap Thread Seal Tape, 260 in L x 1/2 in W x 0.004 in THK, PTFE
MILL-ROSE 70820 YELLOW GAS LINE PTFE TAPE
Teflon - PTFE Thread Seal Tapes
}
Mill-Rose Cleanfit 70820 3-Wrap Thread Seal Tape, 260 in L x 1/2 in W x 0.004 in THK, PTFE
725101
MFG #: 70820
Product ID:725101
Famous Supply
- Color: Yellow
- Maximum Operating Temperature: 500 deg f
- Minimum Operating Temperature: -450 deg f
- Pressure Rating: 4347 psi
- Type: 3-Wrap
- Length: 260 in
- Width: 1/2 in
- Thickness: 0.004 in
- Material: PTFE
Mill-Rose 3-Wrap Yellow Gas Seal Tape is a PTFE thread sealing tape designed specifically for gas lines. This is a full or maximum-density thread sealing tape. Mill-Rose 3-wrap yellow gas seal tape is approved by relevant authorities and used by the gas industry world-wide. It's color-coded yellow so fitters and inspectors can easily recognize it as an approved tape.
- Features
- Standards & Approvals
- Application
| 99 percent PTFE < 1 percent pigment composition |
| > 100 percent elongation |
| 10 to 17 N/sq-mm tensile strength |
| Certified to comply with the provisions of A-A58092 (ASG), UL listed 31RO, Australian gas Association (AGA) 3226 |
| Pressure rating: in tests conducted by an independent laboratory Mill-Rose 3-wrap yellow gas seal tape was found to seal fittings carrying natural gas at pressures up to 4347 psi or 30000 kPa when applied as per instructions |
| Note: pressure ratings are relative to the quality and torque of the fittings and the amount of tape used |
| -400 to 500 deg F PTFE is completely stable up to 500 deg F |
| AGA 3226 |
| ASG A-A58092 |
| cCSAus Listed |
| UL 31RO |
| Ideally suited for natural gas, propane and butane lines, Use on pipe made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS and fiberglass and Do not use Gas Thread Seal Tape on oxygen systems |