Simpson Strong-Tie DIA37S Short Threaded Drop-In Anchor, 3/8 in, 1/2 in Drill, Carbon Steel, 1-9/16 in D Min Embedment

SIMPSON STRONG TIE DIA37S SHORT DROP-IN ANCHOR 3/8" X 3/4" ROD SIZE

Drop-In Anchors
}

Simpson Strong-Tie DIA37S Short Threaded Drop-In Anchor, 3/8 in, 1/2 in Drill, Carbon Steel, 1-9/16 in D Min Embedment

3332214 MFG #: RPS18 Product ID:3332214
Famous Supply
Simpson_Strong_Tie_DIA37S_HR.png
  • Finish: Zinc Plated
  • Overall Length: 3/4 in
  • Shear Strength: 410 at 3000 psi for Concrete
  • Tensile Strength: 335 lb at 3000 psi for Concrete
  • Thread Length: 1/4 in
  • Thread Size: 3/8-16
  • Thread Type: UNC
  • Bolt/Rod Size: 3/8 in
  • Material: Carbon Steel
  • Drill Size: 1/2 in
  • Minimum Embedment Depth: 1-9/16 in
  • Type: Short Threaded
Drop-In anchors are internally threaded drop-in expansion anchors for use in flush-mount applications in solid base materials. Available in stainless steel (DIA), short (DIAS) or coil-thread (DIAC) versions. Minimum thread engagement should be equal to the nominal diameter of the threaded insert.
  • Features
  • Standards & Approvals
  • Application
Lipped edge (DIAS) eliminates need for precisely drilled hole depth
Available in coil-thread version for 1/2 in and 3/4 in coil-threaded rod
Short length (DIAS) enables shallow embedment to help avoid drilling into rebar or pre-stressed/post-tensioned cables
Short drop-in anchors include a setting tool compatible with the anchor to ensure consistent installation
Anchor body meets minimum 70000 psi tensile
Expander plug meets minimum 50000 psi tensile strength
A dedicated setting tool is included
2600 to 2700 deg F freezing/melting point
The allowable loads are based on a safety factor of 4
Allowable loads may not be increased for short-term loading due to wind or seismic forces
Anchors were installed with a 1 in offset from the centerline of the flute
OSHA 29 CFR 1910.1000
Federal Specification A-A-55614
Type I
FM 3017082
UL File Ex3605
For flush mount applications in solid base materials