LEONARD ECO-MIX TA-300-LF Emergency Mixing Valve With Internal Cold Water By-Pass, Activates at Temperature 85 deg F, 1/2 in Inlet, Bronze

LEONARD TA-300-LF EMERGENCY LEAD FREE MIXING VALVE FOR EYE/FACE WASH UNIT 1/2" INLETS/OUTLETS

Eyewash & Shower Thermal Protect. Valves
}

LEONARD ECO-MIX TA-300-LF Emergency Mixing Valve With Internal Cold Water By-Pass, Activates at Temperature 85 deg F, 1/2 in Inlet, Bronze

3332037 Product ID:3332037
Famous Supply
Leonard_TA-300-LF_HR.png
  • Finish: Rough Bronze
  • Activates at Temperature: 85 deg f
  • Inlet Size: 1/2 in
  • Material: Bronze
DURA-trol® solid bimetal thermostat directly linked to valve porting to control the intake of hot and cold water and compensate for supply temperature and pressure fluctuations. DURA-trol is highly responsive and cannot be damaged by extremes in temperature. Thermostatic Mixing Valve can be set to the correct temperature for the application. Locking type temperature regulator to prevent accidental movement set for 85 deg F (29 deg C), Recommended Hot Inlet Temperature 140 deg F. Mixing valve will close down on failure of cold water supply, Mixing Valve with special internal cold water bypass capable of 4 GPM (15 l/min) at 30 PSI (2.1 Bar) upon failure of hot water supply. Adjustable high temperature limit stop set for 90 deg F (32 deg C), Full 1/2 in top or bottom inlets and 1/2 in top outlet, Integral wall support, Dial thermometer (range 0 to 140 deg F, -10 to 60 deg C), Rough bronze finish. Union angle checkstops on inlets.
  • Features
  • Standards & Approvals
  • Application
DURA-trol® solid bi-metal thermostatic control
Locked temperature regulator set for 85 deg F
High temperature limit stop set for 90 deg F
Internal cold water bypass on failure of hot water supply standard on all models
Provide tepid water to eyewash or eye/face wash unit
Performance: On failure of hot water supply, internal cold water by-pass delivers cold water to the emergency fixture, minimum of 4 gpm at 30 psi, on failure of cold water supply, hot water is shut down
Has an integral wall mounting bracket
Certified to meet low lead C US requirements of wetted surface area containing less than 0.25% lead by weight
180 deg F maximum supply temperature
125 psi maximum supply pressure
1/2 in outlet
2 to 9 gpm flow rate
Dimension: 7 in W x 5 in D x 7 in H
ANSI/ISEA Z358.1-2014
ASSE 1071
CSA Certified
For Single Eyewash or Eye/Face Wash Units