Bradford White ElectriFLEX LD LE280T3-3NCWW Light Duty Upright Electric Water Heater, 80 gal Tank, 4.5 kW, 208 VAC, 3 ph, Tall
BRADFORD-WHITE LE280T3-3NCWW 80 GALLON 240V/3PH (2) 4.5 KW ELEMENTS, FIELD CONVERTIBLE TO SIMULTANEOUS OPERATION & SINGLE PHASE
Bradford White ElectriFLEX LD LE280T3-3NCWW Light Duty Upright Electric Water Heater, 80 gal Tank, 4.5 kW, 208 VAC, 3 ph, Tall
- ASME Yes/No: No
- Dimensions: 24 in Dia x 59-1/4 in H
- Domestic/Import: Domestic
- Heating Element: Screw-In Copper
- Material: Steel
- Pressure Rating: 150 psi
- Recovery Rate: 18 gph
- Series: LE280T3-3
- Type: Light Duty
- Water Connection: 3/4 in NPT
- Tank Capacity: 80 gal
- Power Rating: 4.5 kw
- Voltage Rating: 208
- Phase: 3
- Bradford_White_120A-12-3-103G-AA_Catalog.pdf(Catalog)
- Bradford_White_120A-12-3-103G-AA_Warranty.pdf(Warranty Information)
- Bradford_White_CEHD1201833CCF_Warranty.pdf(Warranty Information)
- Bradford_White_LE110U31NAL_Manual.pdf(Instruction Installation Manual)
- Bradford_White_LE110U3-1NAL_Service_Manual.pdf(Service Manual)
- Bradford_White_LE2120T31NALL_Manual.pdf(Instruction Installation Manual)
- Bradford_White_LE2120T31NALL_Service_Manual.pdf(Service Manual)
- Bradford_White_LE2120T31NALL_Specification_Sheet.pdf(Specification Sheet)
- Features
- Warranty
- Standards & Approvals
- Includes
- Application
Fully automatic thermostat control: Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety |
Direct heat transfer with immersed element: Transfers heat directly and efficiently to the water screw-in style |
Factory installed Hydrojet® sediment reduction system |
Vitraglas® lining |
Vitraglas® is fused to the steel surface by firing at a temperature of over 1600 deg F |
Insulation system: 2 in non-CFC foam insulation covers the sides and top of the tank, reducing the amount of heat loss |
Results in less energy consumption, improved operation efficiencies and jacket rigidity |
Water connection: 3/4 in NPT factory installed true dielectric fittings extend water heater life and eases installation |
Factory installed heat traps: Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation |
Protective magnesium rod: Provides added protection against corrosion for long trouble free service |
Steel tank: Heavy gauge steel automatically formed, rolled and welded to assure a continuous seam for glass lining |
Field convertible: Units are shipped from factory standard 3 ph, non-simultaneous and can be converted to 1 ph and/or simultaneous operation in the field |
Copper screw type immersion element |
Hydrojet® total performance system |
3 Years Limited on Tank/1 Year Limited on Component Parts |
AHRI Certified |
ASHRAE 90.1b |
CEC Listed |
cETLus Listed |
CSA Certified |
CSAE Certified |
Massachusetts Approved |
NSF 372 |
UL 1453 |
Temperature and Pressure Relief Valve |
Commercial Application |