Kidde Firex i4618 Wire-In Smoke Alarm, Ionization Sensor, 120 VAC, 80 mA, LED Display, 85 dB at 10 ft

KIDDE i4618 FIREX HARDWIRED SMOKE ALARM W/BATTERY BACK-UP CEILING 21007581

Smoke Detector Alarms
}

Kidde Firex i4618 Wire-In Smoke Alarm, Ionization Sensor, 120 VAC, 80 mA, LED Display, 85 dB at 10 ft

3333147 Product ID:3333147
Famous Supply
Kidde_i4618_HR.png
  • Alarm Type: Smoke
  • Dimensions: 5.6 in Dia x 1.8 in D
  • Humidity Rating: Up to 85%
  • Interconnection Capability: Up to 24 Kidde Devices Including Smoke, CO and Heat Alarms
  • Operating Temperature: 40 to 100 deg f
  • Sensitivity Level: 0.5 to 0.92%/ft
  • Type: Wire-In
  • Wiring Type: Hardwired
  • Sensor Type: Ionization
  • Power Source: 120 VAC, 80 mA
  • Display Type: LED
  • Audible Alert: 85 dB at 10 ft
The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120 VAC power source with 9 VDC battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. The front loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-years limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
  • Features
  • Warranty
  • Standards & Approvals
  • Includes
The Kidde i4618 is an AC/DC powered, ionization smoke alarm
The front loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient
Front battery pull tab allows battery activation without removing alarm from mounting bracket
Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections
Pre-stripped wiring harness with easy off cap does not require stripper tool, tinned strands increase conductivity and wire nut grip
Large centrally located test/hush alarm control button
Dust cover protects sensor from contaminates during construction reducing nuisance alarms
Easy access front loading battery door
Battery backup provides protection in case of power failure
Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms
6 strobe lights/relay module
5 years Limited
UL 217
NFPA 72
The State of California Fire Marshall (Chapter 11)
NFPA 101 (One And Two Family Dwellings)
Federal Housing Authority (FHA)
Housing And Urban Development (HUD)
9 VDC Battery