JB Industries Kobra CLS-60B 1-Piece High Pressure Charging Hose With Secure Seal Fitting, 1/4 in, 60 in L, 800 psi, Kevlar, Domestic

JUST-BETTER CLS-60B KOBRA 60" BLUE HOSE ONLY

Refrigerant Hydraulic Hoses
}

JB Industries Kobra CLS-60B 1-Piece High Pressure Charging Hose With Secure Seal Fitting, 1/4 in, 60 in L, 800 psi, Kevlar, Domestic

3329565 Product ID:3329565
Famous Supply
JB_Industries_Kobra_CCLS_36_HR.png
  • Color: Blue
  • Series: CLS
  • Type: 1-Piece
  • Nominal Size: 1/4 in
  • Length: 60 in
  • Working Pressure: 800 psi
  • Material: Kevlar®
  • Domestic/Import: Domestic
CLS Series hoses feature a secure seal fitting that opens to full flow. The revolutionary patent-pending design on our internal structure significantly reduces blowouts, provides maximum flow and automatically traps refrigerant discharge in the hose. JB also uses a common crimp that grips the full circumference of the hose yielding a maximum hold and uniform seal that prevents leaks and bursts. Pressure rating 800 psi and 4,000 psi burst. These hoses are suitable for R-410A and can be used with all common refrigerants except ammonia. As always, Kobra® hoses are made in the USA.
  • Features
  • Standards & Approvals
Gasket feature a hood with a straight edges that snaps into the straight edges of the barb and straight edges to straight edges force eliminate gasket blowouts
Depressor is barbed and locks into the gasket, meaning the outward force on the depressor pushes the gasket further into place, resulting in no blowouts
Kobra® high pressure hoses are made from Kevlar®, the same material that stops bullets in bullet-proof vests
Kevlar® makes our hoses incredibly strong and flexible, Kobra® hoses feature a nitrile cover which is better than neoprene because it is more resistant to oils, giving the hoses a longer life
800 psi working, 4000 psi burst pressure
5 to 1 safety factory (beat industry standard of 4 to 1)
Use rebuild kit 33112RK, P90022 replacement O-ring
Stainless steel thrust washer insures free rotation even under high pressure
Three points contacts on depressor
JB also uses a common crimp that grips the full circumference of the hoses yielding a maximum hold and uniform seals that prevents leaks and burst
Suitable for R-410A and can be used with all common refrigerants except ammonia
Low loss fitting adapter available
UL Listed