Bell & Gossett 110192LF Pressure Reducing Valve, 1/2 in, NPT, 10 to 25 psig, 5.5 to 6 gpm, Brass Body

B&G 110192LF-M FB-38 12/BX FB-38 LOW PRESSURE REDUCING VALVE WITH FAST FILL FEATURE, SET @ 12 PSIG, 1/2" NPT (12 PER MASTER CARTON)

Hydronic Pressure Regulating Valves
}

Bell & Gossett 110192LF Pressure Reducing Valve, 1/2 in, NPT, 10 to 25 psig, 5.5 to 6 gpm, Brass Body

556352 MFG #: 110192 Product ID:556352
Famous Supply
Xylem_110196LF_HR.png
  • Dimensions: 3-1/16 in W x 4-7/8 in H
  • Temperature Rating: 225 deg f
  • Trim Material: Brass
  • Nominal Size: 1/2 in
  • End Style: NPT
  • Pressure Rating: 10 to 25 psig
  • Flow Rate: 5.5 to 6 gpm
  • Body Material: Brass
Reducing valves fill the system to a preset pressure for optimum performance. Combination Dual Unit Valves include pressure reducing valve and relief valve. B and G reducing valves protect heating and plumbing systems against excessive line pressures. They are factory set at specified limits although adjustment is easily made. Equipped with built-in-strainer and low inlet pressure check valve. Tail piece for union models is combination - 1/2 in cooper sweat and 1/2 in male NPT.
  • Features
  • Standards & Approvals
Fast fill feature reduces start-up time and labor
Low inlet pressure check valve help prevent loss of system pressure if the supply water drops below system pressure
Convenient cleanable strainer is designed to prevent dirt and sediment from entering the system
Union connection available with 1/2 in male NPT thread and 1/2 in female sweat tail-piece for fast, flexible system connection
Brass body construction is highly resistant to corrosion-ideal for water systems
Lead-free brass body/construction is ideal for potable water systems
Contains less than 0.25% lead by weight on wetted surfaces
12 psig factory setting and 125 psig inlet pressure
Construction: Wetted parts- cast lead free brass body, EPT with special insert diaphragm, EPDM check valve, lead free brass seat, lead free brass with EPDM insert stem, lead free brass valve plate, strainer and strainer nut, Non-wetted parts- steel
Maximum flow 5-1/2 to 6 gpm at 125 psig inlet pressure
CSA Certified
ANSI/NSF 372