Tomahawk PowerPEX V-Sleeve 649TX3 V-Sleeve, 3/4 in Nominal, Stainless Steel, Domestic, PEX-B

SIOUX 649TX3 3/4" V-SLEEVE

PEX Sleeves
}

Tomahawk PowerPEX V-Sleeve 649TX3 V-Sleeve, 3/4 in Nominal, Stainless Steel, Domestic, PEX-B

3318049 MFG #: 649TX3 Product ID:3318049
Famous Supply
Sioux_649-TX2_HR.png
  • Length: 0
  • Series: 649
  • Nominal Size: 3/4 in
  • Material: Stainless Steel
  • Domestic/Import: Domestic
Sioux Chief's V-Sleeve stainless steel compression system is to be used to plumb any hot and cold potable plumbing application or radiant heat application. V-Sleeve is to be used with any SDR-9 PEX tubing and size specific ASTM F2159 or ASTM F1807 fitting. V-Sleeve's design shall allow for 360-degree compression over sealing barbs and 360-degree visual inspection of a properly inserted pipe. V-Sleeve's length and seal shall position sleeve compression directly over sealing barbs including the lead-in barb. V-Sleeve shall be F-877 certified.
  • Features
  • Standards & Approvals
Visibility of tube fully inserted in sleeve and to tube stop on fitting
V-Sleeves™ are to be used with ASTM F1807 and F2159 PEX fittings in conjunction with any SDR9 PEX tubing manufactured to the ASTM F876 or ASTM F877
360 deg visibility of crimped sleeve
360 deg compression on all sealing surface areas
Sleeve can be pre-loaded onto fitting or tube
"V" sleeve must be installed using a Sioux chief 305-8_TX compression tool
Third party tested to ASTM F877, UPC listed
Stainless steel PEX sleeve
0.595 in H
0.967 in width
0.889 in ID
Proudly made in america
ASTM F1807