Liberty Pumps FLH61M-2 FLH60 Mid-Range Head Submersible Effluent Pump, 15 ft Rated Head, Non-Automatic, 115 VAC, 1 ph
LIBERTY FLH61M-2 HIGH HEAD EFFLUENT SUMP PUMP 6/10HP 115V 1PH, 25' CORD
Effluent Pumps
}
Liberty Pumps FLH61M-2 FLH60 Mid-Range Head Submersible Effluent Pump, 15 ft Rated Head, Non-Automatic, 115 VAC, 1 ph
3462572
MFG #: FLH61M-2
Product ID:3462572
Famous Supply
- Amperage Rating: 12 FLA/38.9 A Locked Rotor
- Bearing Type: Ball/Race
- Cord Type: SJOOW 25 ft
- Dimensions: 11.2 in W x 7 in D x 16.4 in H
- Domestic/Import: Domestic
- Enclosure Type: NEMA 4X Outdoor/NEMA 1 Indoor
- Frequency Rating: 60
- Horsepower: 6/10
- Impeller Type: Cast Iron Multi-Vane Enclosed
- Material: Heavy Cast Iron
- Motor Speed: 3450 rpm
- Outlet Size: 1-1/2 in and 2 in FNPT
- Series: FLH60
- Temperature Rating: 104 deg F Continuous/140 deg F Intermittent
- Type: Mid-Range Head
- Rated Head: 15 ft
- Voltage Rating: 115
- Phase: 1
The FL60-series by Liberty is a mid-range effluent pump designed for STEP systems, mound systems, liquid waste transfer and higher head de-watering applications. Built of heavy cast iron with an epoxy powder coat finish and stainless steel fasteners, the FL60 will provide years of reliable performance.
- Features
- Warranty
- Standards & Approvals
- Includes
- Application
| 3/4 in solid handling |
| Stainless steel fasteners |
| 416 stainless steel rotor shaft |
| Oil filled hermetically sealed motor with thermal overload protection |
| Unitized carbon and ceramic shaft seal |
| 2 in FNPT with a 1-1/2 in FNPT cast iron flange provided |
| The exterior of the casting shall be protected with powder coat paint |
| Quick-disconnect 25 ft L standard power cord |
| Permanently lubricated upper and lower ball bearings |
| 3 Years Limited |
| cCSAus Certified |
| SSPMA Certified |
| PROP65: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov |
| 1-ph Motor |
| Step Systems, Mound Systems, Liquid Waste Transfer and Higher Head Dewatering |