Bradford White RTG-K-199N1 Infiniti K Series Tankless (Condensing) Natural Gas Water Heater Indoor 199000 BTU/hr, 2 in Vent
BRADFORD-WHITE RTG-K-199N1 INFINITI TANKLESS K SERIES INDOOR TANKLESS WATER HEATER MODEL
Bradford White RTG-K-199N1 Infiniti K Series Tankless (Condensing) Natural Gas Water Heater Indoor 199000 BTU/hr, 2 in Vent
- Dimensions: 36-9/16 in L x 18-19/32 in W x 9-27/32 in D
- Gas Connection: 1/2 or 3/4 or 1 in
- Ignition Type: Direct Electronic
- Mounting Type: Wall Mount
- Series: Infiniti® K Series
- Type: Tankless Condensing
- Water Connection: 3/4 in
- Fuel Type: Nautral Gas ( Field Convertible to Propane)
- Heating Capacity: 199000 btu/hr
- Indoor/Outdoor: Indoor
- Condensing/Non Condensing: Condensing
- Flow Rate: 8.7 gpm
- Vent Type: Direct vent, power vent, and concentric venting terminations approved
- Vent Size: 2 in
- Energy Factor: 0.96
- Ultra Low NOx: Yes
- residential_tankless_infiniti_k_n1_indoor_iomanual_817_984.pdf(Instruction Installation Manual)
- residential_tankless_infiniti_k_n1_indoor_n2_outdoor_application_manual_bwinfkam.pdf(Instruction Installation Manual)
- residential_tankless_infiniti_k_n1_indoor_n2_outdoor_warranty_53321.pdf(Specification Sheet)
- residential_tankless_infiniti_k_n1_indoor_partslist_53341.pdf(Parts)
- residential_tankless_infiniti_k_n1_indoor_specsheet_1152.pdf(Specification Sheet)
- residential_tankless_infiniti_k_n1_n2_indoor_x1_x2_outdoor_servicemanual_53328.pdf(Service Manual)
- Features
- Warranty
- Standards & Approvals
- Application
SRT™ Scale Reduction Technology – Significantly reduces the incidence of scale build-up known to result in poor performance, additional maintenance, and pre-mature component or product failure. |
STEADISET™ Technology – Virtually eliminates cold water sandwich without the need for an internal buffer tank and recirculation pump. |
Self-Calibrating Fan and Gas Valve – Simple combustion management system uses self-calibrating sensors to automatically configure air fuel ratio for flue length, gas type, and altitude - without a combustion analyzer. |
Modulation – Segmented burner with 22:1 turn down ratio |
Top Water Connections – Top water connections for easy retrofit. |
Built-In Digital Control – Temperature can be adjusted on the front control panel (100-140°F) (38°C-60°C). |
Gas Connection Flexibility – 1/2" (13mm), 3/4" (19mm), or 1" (25mm) connections permitted (refer to I&O manual for details). |
Easy LP Gas Field Convertibility – Purchase of additional kit NOT required to convert from NG to LP. |
15-Year Limited Residential Heat Exchanger Warranty. 5-Year Limited Parts Warranty. |
AHRI |
CSA |
ENERGY STAR |
Residential |