Cleanfit Blue Monster 70885 Non-Toxic Thread Seal Tape , 1429 in L x 1/2 in W , 0.0035 in THK , PTFE

MILL-ROSE 70885 1/2" X 1429" BLUE MONSTER THREAD SEAL TAPE 45 PER CASE

Teflon - PTFE Thread Seal Tapes
MFG #: 70885 Product ID:3068473
Famous Supply
  • Color: Blue
  • Maximum Operating Temperature: -400 to 500 deg f
  • Type: Non-Toxic
  • Length: 1429 in
  • Width: 1/2 in
  • Thickness: 0.0035 in
  • Material Type: PTFE
Blue Monster PTFE thread seal tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1429 in roll. That's 5 times more tape than conventional rolls of low density thin tapes. Fewer wraps are necessary to affect a leak proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Now available in a smaller roll, Mini-Monster PTFE thread sealant tape. Blue Monster thread sealing tape is manufactured from PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more.
  • Features
  • Standards & Approvals
  • Application
Compatible with a broad range of gases and liquids
Compatible with a broad range of piping materials will not harden or crack on the joints
Effective across a broad range of temperatures and pressures
Acts as a thread lubricant and anti-seize
Prevents electrolytic corrosion of threads
No curing time
Unlimited shelf life
Non-flammable
99.6% PTFE <0.4 percent composition
>100% elongation
15 N/sq-mm tensile strength
Pressure rating Mill-Rose blue monster thread sealing tape has been used to seal fittings carrying water and oil at pressures up to 10000 psi or 69000 kPa
-450 to 500 deg F PTFE is completely stable up to 500 deg F
Decomposition is slow up to 750 deg F
Although decomposition will occur on contact with naked flames
Pressure ratings are relative to the quality and torque of the fittings and the amount of tape used
UL Listed
For concentrated and dilute acids, alcohols, gasohol, aliphatic solvents, aromatic solvents, chlorinated solvents, liquid ammonia, concentrated caustics, compressed air, steam, water, cutting oils, diesel fuel oil, ethylene glycol, glycerin, fatty acids, heating oils, kerosene, hydraulic fluids, hydraulic oils, gaseous and liquid hydrogen, gaseous and liquid inert gases, jet fuel, ketones, petroleum solvents, liquid petroleum gas, natural gas, mineral oils, vegetable oils, gaseous and liquid nitrogen and liquid soap