if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Zoeller 53-0029 Mighty-Mate 50 Single Seal Non-Automatic Submersible Pump, 43 gpm Flow Rate, 1-1/2 in NPT Outlet, 1 ph, 3/10 hp, Cast Iron, Domestic
ZOELLER 53-0029 BN53 115V/1PH/PB15'/UL PUMP 15' CORD
Submersible Sump Pumps
}
Zoeller 53-0029 Mighty-Mate 50 Single Seal Non-Automatic Submersible Pump, 43 gpm Flow Rate, 1-1/2 in NPT Outlet, 1 ph, 3/10 hp, Cast Iron, Domestic
3261168
MFG #: 53-0029
Product ID:3261168
Famous Supply
- Amperage Rating: 9.7
- Bearing Type: Sleeve
- Cord Type: 3-Wire
- Dimensions: 10-3/32 in W x 10-1/16 in H
- Enclosure Type: Auto Reset Thermal Overload
- Frequency Rating: 60
- Impeller Type: Non-Clogging Vortex
- Maximum Head: 19-1/4 ft
- Motor Speed: 1550 rpm
- Series: Mighty-Mate 50
- Temperature Rating: 130 deg f
- Type: Single Seal Non-Automatic
- Voltage Rating: 115
- Flow Rate: 43 gpm
- Outlet Size: 1-1/2 in NPT
- Horsepower: 3/10
- Material: Cast Iron
- Domestic/Import: Domestic
- Phase: 1
Considered one of America's most popular sump pumps. This robust family of sump pumps is known for reliability, durability and performance. The preset, integral snap-action float switch is engineered for one million mechanical starts. The heat-dissipating cast iron body with epoxy powder coated finish provides maximum pumping performance under the most extreme conditions. With Zoeller® cool run design, the hermetically sealed, oil-filled motor and non-clogging vortex impeller add up to a long-lasting, trouble-free product.
- Features
- Warranty
- Standards & Approvals
- Includes
- Application
| Float-operated, submersible, 2-pole mechanical switch and variable level, long-cycle systems |
| Corrosion-resistant, powder coated epoxy finish |
| No steel sheet metal parts to rust or corrode |
| Stainless steel screws, guard, handle and switch arm |
| No screens to clog |
| Watertight neoprene square ring between motor and pump housing |
| Solid, buoyant, polypropylene float |
| oil filled, hermetically-sealed, automatic reset thermal overload protected motor |
| Upper and lower sleeve bearings running in bath of oil |
| Entire unit pressure-tested after assembly |
| Carbon and ceramic shaft seal |
| Passes 1/2 in spherical solids |
| Watertight and dust-tight |
| Permanently oiled bearings |
| 7-1/4 in on point, 3 in off point |
| Cast iron switch case, motor and pump housing |
| Engineered thermoplastic base |
| Engineered, glass-filled, plastic impeller with metal insert |
| Stainless steel guard and handle |
| Lower and upper bearings, oil-fed cast iron |
| Limited |
| CSA Certified |
| SSPMA Standard |
| UL Listed |
| Stainless Steel Handle and 15 ft Cord with Plug |
| Water Transfer, Sump and Effluent Systems, Light Commercial, New Sump and Residential Construction |