LEGEND 101-024NL T-1001NL Ball Valve, 3/4 in Nominal, FNPT End Style, Brass Body, Full Port, TFM/PTFE Softgoods, Import

LEGEND 101-024NL 3/4 in FULL PORT BALL VALVE FNPT x FNPT FORGED BRASS 600# CWP #LEAD FREE# T-1001NL

Ball Valves
Brand: LEGEND logo
}

LEGEND 101-024NL T-1001NL Ball Valve, 3/4 in Nominal, FNPT End Style, Brass Body, Full Port, TFM/PTFE Softgoods, Import

3270399 MFG #: 101-024NL Product ID:3270399
Famous Supply
  • Actuator Type: Quarter Turn Handle
  • Ball Material: Brass
  • Flow Rate: 28.43 gpm
  • Inlet to Outlet Length: 1.77 in
  • Media: Air/Gas/Oil/Water
  • Pressure Rating: 600 psi
  • Series: T-1001NL
  • Temperature Rating: 250 deg f
  • Top to Inlet Center: 1.28 in
  • Trim Material: Brass Stem and PTFE Seat
  • Nominal Size: 3/4 in
  • End Style: FNPT
  • Body Material: Brass
  • Port Type: Full
  • Softgoods Material: TFM/PTFE
  • Domestic/Import: Import
The 1001 Series Full Port Ball Valves are Maintenance-Free because the stem seals with two FKM O-rings instead of the traditional gland follower or packing gland design. No call backs are necessary to tighten a packing nut. The bottom loaded stem is blow-out proof and includes a PTFE thrust washer that reduces friction and makes for easier actuation. The valve body, end adaptor and cavity ball are forged brass for lighter weight and greater durability, resulting in less torque necessary to actuate the valve and longer life for the seats. The steel handle is Dacromet® coated and will not corrode in aggressive environments. Every valve is manufactured to precise tolerances in a completely automated ISO certified factory and 100% pressure tested. The 1001 Series of ball valves are offered in a variety of configurations for residential, commercial and industrial applications. The T/S-1001 is constructed of UNS C37700 forged brass. The T/S-1001NL is constructed of no lead binary brass alloy.
  • Features
  • Warranty
  • Standards & Approvals
  • Application
Dacromet® coated steel, tamper-evident handwheel nut/handle/locking device, FKM fluoroelastomer stem O-Rings, Dyneon® TFM® PTFE anti-friction washer/thrust washer, Lead free forged brass stem/ball/body/end adapter
Steel handle is Dacromet® coated and will not corrode in aggressive environments
Valve body, end adaptor and cavity ball are forged brass for lighter weight and greater durability, resulting in less torque necessary to actuate the valve and longer life for the seats
O-Ring stem design, lighter weight and durable forged no lead brass body, Blow-out proof stem, PTFE seats for improved wear
Does not require any additional steps to solder, as compared to traditional brass valves
Bottom loaded stem is Blow-out proof and includes a PTFE thrust washer that reduces friction and makes for easier actuation
CSA certified for use with natural, manufactured, mixed, liquid petroleum and lp/gas air mixtures
UL listed 44R8 for LP, natural and manufactured gases, flammables liquids, 6 oil at 250 deg F
Factory mutual approved for fire protection service
UL listed 757x for fire protection service
Lead free design is suitable for all no lead potable water installations in full compliance of all Lead free plumbing laws
Maintenance-free valve
TFM/PTFE thrust washer
5/25 Years
ANSI/ASME B1.20.1
ANSI/ASME B16.33
ANSI/NSF Standard 61-G
MSS SP-110
CSA Certified
U.S. Federal Public Law 111-380
FM Approved
UL Listed 44R8
UL Listed 757X
For Potable Water Installations