Watts Under Sink Guardian 0204143 USG , LFUSG-B-M2 Thermostatic Mixing Valve , 3/8 in Nominal , Compression End Style , 150 psi Pressure , 0.25 gpm Flow , Brass Body , Domestic

WATTS 0204143 *LEAD-FREE* (N) LFUSG-B-M2 3/8" COMPRESSION THERM. MIXING VALVE 60-120 DEG F.

Mixing Valves
MFG #: 0204143 Product ID:3277311
Famous Supply
  • Media: Hot/Cold Water
  • Series: USG
  • Softgoods Material: Buna-N® Rubber Disc, O-Ring
  • Temperature Rating: 80 to 120 deg f
  • Nominal Size: 3/8 in
  • End Style: Compression
  • Pressure Rating: 150 psi
  • Flow Capacity: 0.25 gpm
  • Body Material: Brass
  • Domestic/Import: Domestic
Series LFUSG-B Under Sink Guardian Thermostatic Mixing Valves are used in commercial and residential applications to mix hot and cold water in under-the-sink installations to minimize the risk of accidental scalding. It consists of a Lead Free brass body construction with 3/8 in. male compression connections and quick-connect, check valves, tamper resistant locking nut and integral strainer with 40 mesh stainless steel screens to filter out debris. Series LFUSG-B uses a thermostat to control hot and cold water temperature, and dual check valves to protect against cross flow. It provides superior flow rate (between 0.25 and 2.25 gpm), accurate temperature control, and low pressure drop. It is suitable for under the counter installations where the water delivered to the fixtures is intended for washing. Satin-chrome finish (-SC) models available. ASSE 1070, CUPC listed.
  • Features
  • Warranty
  • Standards & Approvals
  • Application
Lead free brass body construction
Installs easily between the stop valves and faucet
Includes tamper resistant locking nut to prevent accidental mis adjustment
Built-in check valves prevent migration of hot water to cold and cold water to hot water piping
Provided with cap for three port application
Integral strainer with 40 mesh stainless steel screens to filter out debris
0.25 gpm (1 l/m) flow
30 psi minimum supply pressure
120 to 180 deg F hot inlet temperature
39 to 80 deg F cold inlet temperature
5 deg F minimum inlet temperature differential
80 to 120 deg F temperature
150 psi maximum pressure
The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight
1 Year Limited
ASSE 1070
cUPC Listed
PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Commercial and Residential