Bradford White RE110U6-1NAL Utility Electric Water Heater, 10 gal Tank, 120 VAC, 1.5 kW, 1 ph Phase
BRADFORD-WHITE RE110U6-1NAL 10 GAL 120V 1500W WITH INSTALLED T&P VALVE
Residential Electric Tank Water Heaters
}
Bradford White RE110U6-1NAL Utility Electric Water Heater, 10 gal Tank, 120 VAC, 1.5 kW, 1 ph Phase
3329161
Product ID:3329161
Famous Supply
- ASME Yes/No: No
- Dimensions: 16 in Dia x 17-1/2 in H
- Heating Element: Screw-In Copper
- Pressure Rating: 150 psi
- Recovery Rate: 7 gph
- Series: RE110U6
- Type: Utility
- Water Connection: 3/4 in NPT
- Tank Capacity: 10 gal
- Voltage Rating: 120
- Power Rating: 1.5 kw
- Phase: 1
- Tall or Short: Short
- Domestic/Import: Domestic
These compact models are, as the name implies, utility water heaters that provide smaller volumes of hot water where usage is intermittent or demand is lower.
- Bradford_White_LE110U3-1NAL_Service_Manual.pdf(Service Manual)
- Bradford_White_MS120R6SS1NAN_Warranty.pdf(Warranty Information)
- Bradford_White_RE110U61NAL_Manual.pdf(Instruction Installation Manual)
- Bradford_White_RE110U61NAL_Service_Manual.pdf(Service Manual)
- Bradford_White_RE110U61NAL_Specification_Sheet.pdf(Specification Sheet)
- Bradford_White_RE110U6-1NAL_Warranty.pdf(Warranty Information)
- Bradford_White_RTV-120-L_Catalog.pdf(Catalog)
- Features
- Warranty
- Standards & Approvals
- Includes
- Application
| Fully automatic thermostat control: Fast acting surface-mount thermostat for automatic temperature control |
| Factory installed sensitive manual reset energy cut-off for safety to prevent overheating |
| Direct heat transfer with a single immersed element: Transfers heat directly and efficiently to the water |
| Vitraglas® lining |
| Vitraglas® is fused to the steel surface by firing at a temperature of over 1600 deg F |
| 1 in non-CFC foam insulation: covers the sides and top of the tank, reducing the amount of heat loss |
| Results in less energy consumption, improved operation efficiencies and jacket rigidity |
| Water connections: 3/4 in NPT factory-supplied true dielectric fittings extend water heater life |
| Located on the side for easier installation (Fittings packaged separately inside carton) |
| Protective magnesium anode rod: Provide added protection against corrosion for long-term, trouble free service |
| Design evaluated by ETL in accordance with Part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency |
| Non-simultaneous operation |
| 6 Years Limited on Tank/6 Years Limited on Component Parts |
| AHRI Certified |
| CEC Listed |
| cETLus Listed |
| CSA C191.1-M90 |
| Massachusetts Approved |
| NSF 372 |
| UL 1453 |
| UL 174 |
| Temperature and Pressure Relief Valve |
| Residential Application |