Bradford White RE230L6-1NCWW Lowboy Electric Water Heater , 28 gal Tank , 240 / 208 VAC , 4.5 kW , 1 ph Phase

BRADFORD-WHITE RE230L6-1NCWW 28 GAL 240V 4500W 4500W 208V 3500W 3500W WITH INSTALLED T&P VALVE & INSULATION BLANKET

Residential Electric Tank Water Heaters
MFG #: RE230L6-1NCWW Product ID:3329170
Famous Supply
  • ASME Yes/No: No
  • Dimensions: 22 in Dia x 31.023 in H
  • Energy Factor: 0.92
  • Heating Element: Screw-In Copper
  • Pressure Rating: 150 psi
  • Recovery Rate: 21 gph
  • Series: RE230L6
  • Type: Lowboy
  • Water Connection: 3/4 NPT in
  • Tank Capacity: 28 gal
  • Voltage Rating: 240 / 208 vac
  • Power Rating: 4.5 kw
  • Phase: 1 ph
  • Tall or Short: Short
  • Domestic/Import: Domestic
Residential Electric models, with their varied configurations, fit just about any location. Built for tight spaces with low headroom, Lowboy models allow you flexibility to put electric water heating where a conventional upright tank will not fit. Bradford White offers models with and without insulation blankets.
  • Features
  • Warranty
  • Standards & Approvals
  • Includes
  • Application
Low restriction brass drain valve: Durable tamper proof design
Fully automatic thermostat control: Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety
Direct heat transfer with a single immersed element: Transfers heat directly and efficiently to the water
Factory installed hydrojet® total performance system: Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build-up in tank
Vitraglas® lining
Vitraglas® is fused to the steel surface by firing at a temperature of over 1600 deg F
Insulation system: Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss, this results in less energy consumption, improved operation efficiencies and jacket rigidity and blanketed models additionally use a supplied flexible fiberglass insulation blanket
Water connections: 3/4 in NPT factory-installed true dielectric fittings extend water heater life and simplify water line connections
Factory installed heat traps: Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
Protective magnesium anode rod: Provide added protection against corrosion for long-term, trouble free service
Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency
Non-simultaneous operation: Non-simultaneous operation indicates only one heating element will operate at a time and is standard construction from the factory
6 Years Limited on Tank/6 Years Limited on Component Parts
AHRI Certified
CEC Listed
CSA Certified
ETL Listed
Massachusetts Approved
NSF 372
UL 1453
Temperature and Pressure Relief Valve
Residential Application