Bradford White RE340S6-1NCWW-264 Upright Electric Water Heater, 40 gal Tank, 240 / 208 VAC, 4.5 kW, 1 ph Phase, Short, Aluminum Anode
BRADFORD-WHITE RE340S6-1NCWW-264 40 GAL 240V 4500W 4500W 208V 3500W 3500W ALUM ANODE WITH INSTALLED T&P VALVE

Bradford White RE340S6-1NCWW-264 Upright Electric Water Heater, 40 gal Tank, 240 / 208 VAC, 4.5 kW, 1 ph Phase, Short, Aluminum Anode
- ASME Yes/No: No
- Dimensions: 22 in Dia x 47-7/8 in H
- Energy Factor: 0.91
- Heating Element: Screw-In Copper
- Pressure Rating: 150 psi
- Recovery Rate: 21 gph
- Series: RE340S6
- Type: Upright
- Water Connection: 3/4 NPT in
- Tank Capacity: 40 gal
- Voltage Rating: 240 / 208
- Power Rating: 4.5 kw
- Phase: 1
- Tall or Short: Short
- Domestic/Import: Domestic
- Bradford_White_LE110U3-1NAL_Service_Manual.pdf(Service Manual)
- Bradford_White_MS120R6SS1NAN_Warranty.pdf(Warranty Information)
- Bradford_White_RE110U61NAL_Manual.pdf(Instruction Installation Manual)
- Bradford_White_RE110U6-1NAL_Warranty.pdf(Warranty Information)
- Bradford_White_RE240S61NAPP_Manual.pdf(Instruction Installation Manual)
- Bradford_White_RE240S61NAPP_Service_Manual.pdf(Service Manual)
- Bradford_White_RE240S61NAPP_Specification_Sheet.pdf(Specification Sheet)
- Bradford_White_RTV-120-L_Catalog.pdf(Catalog)
- Features
- Warranty
- Standards & Approvals
- Includes
- Application
Fully automatic thermostat control: Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety |
Low restriction brass drain valve: Durable tamper proof design |
Direct heat transfer with immersed element: Transfers heat directly and efficiently to the water screw-in style |
Screw-in style element |
Factory installed hydrojet® total performance system: Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build-up in tank |
Vitraglas® lining |
Vitraglas® is fused to the steel surface by firing at a temperature of over 1600 deg F |
Insulation system: Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss, this results in less energy consumption, improved operation efficiencies and jacket rigidity |
Water connections: 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections |
Factory installed heat traps: Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation |
Aluminum anode rod |
Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency |
Non-simultaneous operation |
6 Years Limited on Tank/6 Years Limited on Component Parts |
AHRI Certified |
ASHRAE 90.1b |
CEC Listed |
cETLus Listed |
CSA Certified |
Massachusetts Approved |
NAECA Compliant |
NSF 372 |
UL 1453 |
UL 174 |
Temperature and Pressure Relief Valve |
Residential Application |