Bradford White RE350S6-1NCWW Upright Electric Water Heater, 50 gal Tank, 240 / 208 VAC, 4.5 kW, 1 ph Phase
BRADFORD-WHITE RE350S6-1NCWW 50 GAL 240V 4500W 4500W 208V 3500W 3500W WITH INSTALLED T&P VALVE
Bradford White RE350S6-1NCWW Upright Electric Water Heater, 50 gal Tank, 240 / 208 VAC, 4.5 kW, 1 ph Phase
- ASME Yes/No: No
- Dimensions: 24 in Dia x 47.755 in H
- Energy Factor: 0.92
- Heating Element: Screw-In Copper
- Pressure Rating: 150 psi
- Recovery Rate: 21 gph
- Series: RE350S6
- Type: Upright
- Water Connection: 3/4 NPT in
- Tank Capacity: 50 gal
- Voltage Rating: 240 / 208
- Power Rating: 4.5 kw
- Phase: 1
- Tall or Short: Tall
- Domestic/Import: Domestic
- Bradford_RE112T6-1NAL_Service_Manual.pdf(Service Manual)
- Bradford_RE112T6-1NAL_Warranty.pdf(Warranty Information)
- Bradford_RE230L6-1NCWW_Line_Drawing.pdf(Line Drawing)
- Bradford_White_MS120R6SS1NAN_Warranty.pdf(Warranty Information)
- Bradford_White_RE110U61NAL_Manual.pdf(Instruction Installation Manual)
- Bradford_White_RE240S61NAPP_Line_Drawing.pdf(Line Drawing)
- Bradford_White_RE240S61NAPP_Manual.pdf(Instruction Installation Manual)
- Bradford_White_RE240S61NAPP_Service_Manual.pdf(Service Manual)
- Bradford_White_RE240S61NAPP_Specification_Sheet.pdf(Specification Sheet)
- Features
- Warranty
- Standards & Approvals
- Includes
- Application
Fully automatic thermostat control: Fast acting surface-mount thermostat for automatic temperature control |
Low restriction brass drain valve: Durable tamper proof design |
Direct heat transfer with a single immersed element: Transfers heat directly and efficiently to the water |
Screw-in style element |
Factory installed hydrojet® total performance system: Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build-up in tank |
Vitraglas® lining |
Non-CFC foam insulation: Covers the sides and top of the tank, reducing the amount of heat loss |
Water connection: 3/4 in NPT factory installed true dielectric fittings extend water heater life and eases installation |
Factory installed heat traps: Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation |
Protective magnesium anode rod: Provide added protection against corrosion for long-term, trouble free service |
Non-simultaneous operation indicates when one element is being heated at a time |
Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency |
6 Years Limited on Tank/6 Years Limited on Component Parts |
AHRI Certified |
CEC Listed |
CSA Certified |
ETL Listed |
Massachusetts Approved |
NSF 372 |
UL 1453 |
Temperature and Pressure Relief Valve |
Residential Application |