Bradford White RE350S6-1NCWW-264 Upright Electric Water Heater , 50 gal Tank , 240 / 208 VAC , 4.5 kW , 1 ph Phase , Short, Aluminum Anode

BRADFORD-WHITE RE350S6-1NCWW-264 50 GAL 240V 4500W 4500W 208V 3500W 3500W ALUM ANODE WITH INSTALLED T&P VALVE

Residential Electric Tank Water Heaters
MFG #: RE350S6-1NCWW-264 Product ID:3329183
Famous Supply
  • ASME Yes/No: No
  • Dimensions: 24 in Dia x 47 in H
  • Energy Factor: 0.92
  • Heating Element: Screw-In Copper
  • Pressure Rating: 150 psi
  • Recovery Rate: 21 gph
  • Series: RE350S6
  • Type: Upright
  • Water Connection: 3/4 NPT in
  • Tank Capacity: 50 gal
  • Voltage Rating: 240 / 208 vac
  • Power Rating: 4.5 kw
  • Phase: 1 ph
  • Tall or Short: Short
  • Domestic/Import: Domestic
Our line of upright electric models features the power of the Hydrojet® Total Performance System and the convenience of electricity. Available in single and double element models, these water heaters give you the power you need to heat water with electricity.
  • Features
  • Warranty
  • Standards & Approvals
  • Includes
  • Application
Fully automatic thermostat control: Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety
Low restriction brass drain valve: Durable tamper proof design
Direct heat transfer with immersed element: Transfers heat directly and efficiently to the water screw-in style
Screw-in style element
Factory installed hydrojet® total performance system: Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build-up in tank
Vitraglas® lining
Vitraglas® is fused to the steel surface by firing at a temperature of over 1600 deg F
Insulation system: Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss, this results in less energy consumption, improved operation efficiencies and jacket rigidity
Water connections: 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections
Factory installed heat traps: Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
Aluminum anode rod
Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency
Non-simultaneous operation
6 Years Limited on Tank/6 Years Limited on Component Parts
AHRI Certified
ASHRAE 90.1b
CEC Listed
cETLus Listed
CSA Certified
Massachusetts Approved
NAECA Compliant
NSF 372
UL 1453
UL 174
Temperature and Pressure Relief Valve
Residential Application