Bradford White RG250T6N Natural Gas Water Heater , 40000 Btu/hr Heating , 50 gal Tank , Atmospheric Vent , 43 gph Recovery


Residential Gas Tank Water Heaters
MFG #: RG250T6N Product ID:3329221
Famous Supply
  • Dimensions: 22 in Dia x 25-1/2 in D x 60-5/16 in H
  • Energy Factor: 0.63
  • Gas Connection: 1/2 in
  • Ignition Type: Piezo
  • Pressure Rating: 150 psi
  • Vent Size: 3 x 4 in
  • Water Connection: 3/4 in NPT
  • Heating Capacity: 40000 btu/hr
  • Tank Capacity: 50 gal
  • Fuel Type: Natural Gas
  • Vent Type: Atmospheric
  • Recovery Rate: 43 gph
  • Ultra Low NOx: No
  • Domestic/Import: Domestic
Bradford White® Defender System Atmospheric Vent water heaters utilize a draft diverter and are atmospherically vented with capacities ranging from 30 to 50 gallons and inputs ranging from 30000 to 50000 Btu/hr Defender Atmospheric Vent models are perfect for many standard water heating applications.
  • Features
  • Warranty
  • Standards & Approvals
  • Includes
  • Application
Bradford White® ICON System™: Intelligent gas control with proven millivolt powered technology and built-in piezo igniter off the shelf thermopile converts heat energy from the pilot flame into electrical energy to operate the gas valve and microprocessor, no need for external electricity
Enhanced performance: Proprietary algorithms provide enhanced first hour delivery rating and tighter temperature differentials
Advanced temperature control system: Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
Intelligent diagnostics: An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting
Pilot on indication: Flashing green led provides positive indication that pilot is on
Separate immersed thermowell: High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
Advanced ScreenLok® technology flame arrester design: Flame arrester is designed to prevent ignition of flammable vapor outside of the water heater
Resettable thermal switch: Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapors burning inside of the combustion chamber or restricted air flow
Maintenance free: No regular cleaning of air inlet openings or flame arrester is required under normal conditions
Sight window: Offers a view into the combustion chamber to observe the operation of the pilot and burner
Factory installed Hydrojet® total performance system: Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank
Vitraglas® lining
Insulation system: Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity
Pedestal base
Water connections: 3/4 in NPT factory installed true dielectric fittings
Factory installed heat traps
Protective magnesium anode rod
3 x 4 in "Snap Lock" draft diverter: Allows either 3 or 4 in vent connections with inputs of 40000 Btu/hr or less, over 40000 Btu/hr has the 4 in "Snap Lock" draft diverter
Low restriction brass drain valve: Durable tamper proof design
FVIR defender safety System®
6 Years Limited on Tank/6 Years Limited on Component Parts
AHRI Certified
ANSI Z21.10.1-2014
ASHRAE 90.1b
CEC Listed
CSA 4.1-2014
CSA International (Formerly AGA/CGA)
CSA LLC - Low Lead Compliant
Massachusetts Approved
NAECA Compliant
NSF 372
Temperature and Pressure Relief Valve
Residential Application