Bradford White RG2PV50T6N Natural Gas Water Heater , 40000 Btu/hr Heating , 50 gal Tank , Power Vent , 43 gph Recovery


Residential Gas Tank Water Heaters
MFG #: RG2PV50T6N Product ID:3329252
Famous Supply
  • Dimensions: 22 in Dia x 27-3/16 in D x 66-7/8 in H
  • Energy Factor: 0.67
  • Gas Connection: 1/2 in
  • Ignition Type: Pilot
  • Pressure Rating: 150 psi
  • Series: TTW®
  • Vent Size: 2 x 3 in
  • Water Connection: 3/4 in NPT
  • Heating Capacity: 40000 btu/hr
  • Tank Capacity: 50 gal
  • Fuel Type: Natural Gas
  • Vent Type: Power
  • Recovery Rate: 43 gph
  • Ultra Low NOx: No
  • Domestic/Import: Domestic
Our Power Vent (TTW®) models are power vented for positive exhaust. They offer greater installation flexibility with the ability to vent through a wall or roof, with either 2 or 3 in PVC, ABS or CPVC pipe. They offer an increased amount of hot water available at a usable temperature in less time than normal.
  • Features
  • Warranty
  • Standards & Approvals
  • Includes
  • Application
Bradford White® ICON System™: Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC)
Enhanced performance: Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
Advanced temperature control system: Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
Intelligent diagnostics: An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting
Power vent water heater: Designed for installations where atmospheric units cannot be used, exhaust gases are vented under positive pressure directly out of the building through the roof or the wall
Powerful blower motor: Our significantly quiet design has greater resistance to outside winds and the power to vent in many difficult venting situations
Horizontal and vertical venting: PVC, ABS or CPVC
Advanced ScreenLok® technology flame arrester design: Flame arrester is designed to prevent ignition of flammable vapor outside of the water heater
Flammable vapor sensor: Electronic sensor prevents burner operation if flammable vapors are detected
Maintenance free: No regular cleaning of air inlet openings or flame arrester is required under normal conditions
Sight window: Offers a view into the combustion chamber to observe the operation of the pilot and burner
Factory installed Hydrojet® total performance system: Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank
Vitraglas® lining
Insulation system: Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity
Water connections: 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections
Factory installed heat traps: Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
Low restriction brass drain valve: Durable tamper proof design
Protective magnesium rod
FVIR defender safety System®
6 Years Limited on Tank/6 Years Limited on Component Parts
AHRI Certified
ANSI Z21.10.1-2014
ASHRAE 90.1b
CEC Listed
CSA 4.1-2014
CSA International (Formerly AGA/CGA)
CSA LLC - Low Lead Compliant
EnergyStar® Certified
Massachusetts Approved
NSF 372
10 ft 120 VAC Power Cord
Residential Application