Zoeller 53-0001 Mighty-Mate M53 Automatic Effluent/Dewatering Submersible Pump, 43 gpm Flow Rate, 1-1/2 in Outlet, 1 ph, 3/10 hp, Cast Iron

ZOELLER 53-0001 M53 1/3HP 115V SUMP PUMP MIGHTY-MATE CAST IRON, 1-1/2" DISCHARGE 9' CORD, 3 YEAR WARRANTY

Submersible Sump Pumps
}

Zoeller 53-0001 Mighty-Mate M53 Automatic Effluent/Dewatering Submersible Pump, 43 gpm Flow Rate, 1-1/2 in Outlet, 1 ph, 3/10 hp, Cast Iron

554262 MFG #: 53-0001 Product ID:554262
Famous Supply
Zoeller_53_0001_HR.png
  • Amperage Rating: 9.7
  • Bearing Type: Sleeve
  • Cord Type: 3-Wire
  • Dimensions: 10.0625 in H x 10.06 in W
  • Frequency Rating: 60
  • Impeller Type: Non-Clogging Vortex
  • Maximum Head: 19-1/4 ft
  • Motor Speed: 1550 rpm
  • Series: Mighty-Mate M53
  • Temperature Rating: 130 deg f
  • Type: Automatic
  • Voltage Rating: 115
  • Flow Rate: 43 gpm
  • Outlet Size: 1-1/2 in
  • Phase: 1
  • Horsepower: 3/10
  • Material: Cast Iron
The Mighty-Mate series of submersible pumps is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. Cast iron models include a epoxy powder coated finish to prevent corrosion and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller® pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance. This attention to detail is an inherent feature of every pump in this series, making it one of the most reliable in the industry.
  • Features
  • Standards & Approvals
  • Application
Corrosion-resistant, powder coated epoxy finish
No sheet metal parts to rust or corrode
Stainless steel screws, switch arm, guard and handle
No screens to clog, watertight, neoprene square ring between motor and pump housing
Solid, buoyant, polypropylene float, oil filled, hermetically sealed, automatic reset thermal overload protected motor
Upper and lower sleeve bearings running in bath of oil, Entire unit pressure-tested after assembly, carbon and ceramic shaft seal
Watertight and dust tight, permanently oiled bearings
Cast iron switch case, motor and pump housing, engineered thermoplastic base, glass filled, plastic impeller with metal insert
Entire unit pressure-tested after assembly
Class B insulation, 7-1/4 in/3 in auto On/Off points
1/2 in spherical solid handling, 9 ft cord, oil filled cooling
Cast iron cap, motor and pump housing, base, carbon and ceramic mechanical seals, engineered plastic impeller, stainless steel hardware, neoprene gasket
AISI 1215 cold roll steel motor shaft
Single phase, shaded pole, 3 wire cord and plug
1-1/2 in NPT discharge
CSA/US Certified
SSPMA Certified
UL Listed
Dewatering (Sump), Enhanced Flow Step Systems, Low Pressure Pipe (LPP) and Septic Tank